Support & Installation

Set up your Enbio.

Everything you need to know to get your world-class autoclave ready for its first cycle.

Installation Timeline

This video shows how to install your Enbio autoclave and prepare it for operation. Suitable for Enbio S, Enbio S Beauty Edition and Enbio PRO*.

Step-by-step instructions.

01

Unbox your Enbio

Carefully remove the device and all accessories from the packaging. Keep the original box and protective inserts in case you need to transport the device in the future.

02

Place the device

Position the autoclave on a stable, level surface. Make sure the device is easy to access and that the ventilation area is not blocked.

03

Install the HEPA filter

Attach the HEPA filter according to the instructions shown in the video and in the user manual. The HEPA filter is an important part of the system and should be installed before first use.

04

Connect water hoses

Connect the water inlet and outlet hoses to the correct ports on the device. Make sure each hose is properly inserted and securely connected.

05

Prepare water container

Place the water hose in the correct container according to the instructions. Use water that meets the quality requirements specified in the user manual.

06

Connect power

Securely connect the power cable to the device and then to a suitable power outlet.

07

Turn on autoclave

Switch on the device and follow the beautifully intuitive instructions displayed on the screen.

Additional step for Enbio PRO

Chamber drain filter.

Enbio PRO includes an additional chamber drain filter. This filter is placed in the lower drain area of the chamber and helps protect the system by preventing small fragments from entering the drain.

Frequently Asked Questions.

Which Enbio models does this installation guide apply to?
This guide applies to Enbio S, Enbio S Beauty Edition and Enbio PRO.
Is the installation process the same for Enbio S and Enbio S Beauty Edition?
Yes. Enbio S and Enbio S Beauty Edition follow the same standard installation process.
What is different when installing Enbio PRO?
For Enbio PRO, you should also install the lower chamber drain filter inside the chamber.
What does the Enbio PRO lower chamber drain filter do?
It helps protect the lower chamber drain by preventing small fragments from entering the system.
Should I watch the video before installing the device?
Yes. We recommend watching the full installation video before setting up your autoclave for the first time.
Do I need to keep the original packaging?
Yes. We recommend keeping the original packaging in case the device needs to be transported or returned for service.

Still need help?

Our support team is here to ensure your Enbio is set up perfectly. Don't hesitate to reach out.

Contact support Download manual