Autoclave for Tattoo Studio
Short cycles. More room for your instruments.

Sterilization that keeps pace with your studio.
When several artists are working, Enbio Pro gives you room to process up to 16 pouches of reusable instruments in one load. Its 15-minute wrapped cycle at 134°C includes drying, so you can replenish instrument packs throughout the day.
REUSABLE TATTOO EQUIPMENT
How can contamination spread between sessions?
In some tattoo cartridge systems, blood or ink can flow back toward the grip or machine. A cartridge membrane can help prevent this. If fluid reaches a reusable part, it can carry contamination into the next session unless the part is properly processed.
Heading
Check what stays between clients?
Look at the part that connects your cartridge to the machine. If the grip, adapter, tube, or tip is reusable, check the manufacturer’s instructions and local health requirements for how to process it between clients.
Heading
Where an autoclave comes in?
Some reusable parts require sterilization after cleaning. An autoclave lets you steam-sterilize compatible parts in your studio. Follow the part manufacturer’s instructions and use a cycle that meets its requirements.
Why sterilization matters, even with disposable needles?
Every client gets a new sterile needle or cartridge. With some tattoo machines, the grip that holds the cartridge is reusable. Depending on the setup, blood or ink can contaminate reusable parts during a session. How those parts are processed between clients matters.

Use a fresh cartridge
Use a new sterile needle or cartridge for each client and discard it after the session.

Sterilize before reuse
Clean reusable parts that require sterilization, then process them in an autoclave according to the manufacturer’s instructions and local requirements. Enbio Pro gives your studio a dedicated way to steam-sterilize compatible parts between clients.

Check which parts are reusable
Grips, tubes, and tips can be reusable, depending on the equipment. Check the manufacturer’s instructions to see which parts require sterilization and are compatible with steam.
Technical Specifications
| Specification | Enbio PRO |
|---|---|
| Dimensions (W × D × H) |
57.5 x 27 x 20 cm
|
| Chamber volume |
5.3 L
|
| Pouch capacity |
up to 16 pouches
|
| Wrapped 134°C, including drying |
15 min
|
| Wrapped 121°C, including drying |
30 min
|
| Unwrapped 134°C, without drying |
9 min
|
| Unit weight |
Approx. 20 kg
|
| Power supply |
220-240V/50-60Hz
|

I already use disposable cartridges. What would I sterilize?
Use this text to share information about your brand with your customers. Describe a product, share announcements, or welcome customers to your store.

What if my entire setup is disposable?
Even if you use a new needle cartridge for every client, double-check the part that connects it to your machine. Depending on your setup, the cartridge grip or adapter may be reusable. If you reuse that part, follow the manufacturer’s instructions and local health requirements to find out whether it needs sterilization between clients.

Can I run a wrapped cycle between appointments?
The 134°C wrapped cycle takes approximately 15 minutes, including drying. Allow additional time to clean and package reusable parts before loading.

Can I sterilize my reusable grip in Enbio Pro?
Yes. Enbio Pro can steam-sterilize reusable tattoo grips when the grip manufacturer’s instructions specify a cycle that Enbio Pro offers. Check the instructions for your specific grip to confirm that it can be steam-sterilized and which cycle to use.

Will it fit on my counter?
At just 27 cm wide, Enbio Pro fits on a narrow section of your counter. The unit is 57.5 cm deep, so when you measure your space, leave extra room in front to open the drawer fully and load pouches comfortably.
Bring Sterilization In-House with Enbio Pro
Sterilize compatible reusable grips, tubes, and tips right in your tattoo studio. Enbio Pro combines a compact footprint with short wrapped cycles, so you can replenish instrument packs between sessions.
FAQ
Why choose Enbio Pro for my tattoo studio?
If several artists share one sterilization station, Enbio Pro gives you room to process more instrument packs in one load. Its 5.3 L chamber holds up to 16 pouches, depending on their size and arrangement, so you can batch compatible reusable parts from multiple stations.
Can Enbio Pro keep up with back-to-back appointments?
The wrapped cycle at 134°C takes approximately 15 minutes, including drying. That gives you flexibility to replenish instrument packs throughout the day. Allow extra time for cleaning and packaging before loading.
Can I use Enbio Pro with the reusable grips I already own?
Yes, if your grips are compatible with steam sterilization and their manufacturer specifies a cycle that Enbio Pro offers. Check the instructions for your specific grip to confirm compatibility and choose the right cycle.
What do I need to set up Enbio Pro in my studio?
Enbio Pro is 27 cm wide and 57.5 cm deep. Leave enough room in front to open the drawer fully. With the Enbio Magic Filter, a single water bottle serves both the inlet and outlet, so there’s no need for a permanent plumbing connection. Check the user manual for electrical and clearance requirements.
Where can I buy Enbio Pro and get support?
Use our Where to Buy page to find an authorized distributor and ask about pricing and availability. For maintenance or service after purchase, visit service webiste.

